Diagnostics And Troubleshooting On; System Fans; Resetting The Power Supply - HP Z210 Maintenance And Service Manual

System fans

This workstation includes:
One rear system fan
●
One CPU heatsink fan
●
One power supply fan
●
In addition, an optional front system fan is available for special environments, and many graphics
cards include onboard fans.

Resetting the power supply

If an overload triggers the power supply overload protection, power is immediately disconnected.
To reset the power supply:
1. Disconnect the power cord from the workstation.
2.
Determine what caused the overload and fix the problem. For troubleshooting information, see
Diagnostics and troubleshooting on page
3. Reconnect the power cord and restart the workstation.
When you power off the workstation through the operating system, power consumption falls below
what is considered low power consumption but does not reach zero. This low power consumption
feature extends the life of the power supply.
10 Chapter 1 Product overview
109.
ENWW