CPU
This section describes how to remove and install a CPU.
Removing a CPU
To remove a CPU:
1.
Disconnect power from the workstation (see
2.
Remove the side access panel (see
3.
Remove the CPU heatsink (see
4.
Raise the CPU socket lever (1) and open the cover (2) as shown in the following figure.
Figure 5-41
CAUTION:
extreme care and handle the CPU only by the edges.
5.
Pull the CPU straight out of the socket (3). Store the CPU in a static free container in a safe place
where it cannot be damaged.
ENWW
Removing the side access panel on page
Removing the CPU heatsink on page
Removing a CPU
Do not touch the CPU socket contacts or the gold pads underneath the CPU. Use
Predisassembly procedures on page
Removing and installing components
62).
65).
98).
101