Expansion Card Slot Identification; Slot Identification And Description - HP Z210 Maintenance And Service Manual

Expansion card slot identification

This section identifies and describes workstation expansion card slots, and presents card configuration
information.

Slot identification and description

The following figure identifies workstation expansion card slots.
Figure 5-28
The following table describes the workstation PCIe card slots.
Table 5-5 PCI slots
Slot Type
1 PCIe2 - x8(4)
2 PCIe2 - x16
3 PCIe2 - x1
4 PCIe2 - x16(4)
5 PCIe2 - x1
6 PCI 32b/33MHZ
7 PCI 32b/33MHZ
NOTE:
The x1, x4, and x16 designators describe the mechanical length of the slot. The number in
parentheses lists the number of electrical PCIe lanes routed to the expansion slot. For example, x16(4)
means that the expansion slot is mechanically a x16 length connector, with four PCIe lanes connected.
ENWW
Identifying expansion card slots
Slot power
(per slot)
25W
75W
10W
25W
10W
25W
25W
Slot power
(maximum)
150W max for
total power
usage of all
card slots
Removing and installing components
87