Download  Print this page

Erp Compliance Mode; Enabling Erp Compliance Mode; Disabling Erp Compliance Mode; Accessibility - HP Z210 Maintenance And Service Manual

Convertible mini tower workstation.
Hide thumbs

Advertisement

ERP compliance mode

This computer provides ERP compliance mode capability.
When enabled, this feature enables the computer to shut down to the lowest possible power state by
removing all power to the system board.
When disabled, the computer powers down conventionally.
When the computer is shut down in ERP compliance mode, it must be powered up with the computer
power button.

Enabling ERP compliance mode

To enable ERP compliance mode:
1.
Press
F10
2.
Using the arrow keys, select the Power>Hardware Power Management>S5 Maximum
Power Savings, and then select Enable.
3.
Press
F10
4.
Select File>Save Change and Exit, and then press

Disabling ERP compliance mode

To disable the ERP compliance mode:
1.
Press
F10
2.
Select Power>Hardware Power Management>S5 Maximum Power Savings, and
then select Disable.
3.
Press
F10
4.
Select File>Save Change and Exit, and then press

Accessibility

HP is committed to developing products, services, and information that is easier to access for all
customers, including customers with disabilities and age-related limitations. HP products with
Windows® 7 preinstalled are designed for accessibility. These products are tested with industry-
leading Assistive Technology products. For more information see http://www.hp.com/accessibility.

Hyper-threading

This HP computer supports Hyper-threading.
Hyper-Threading Technology (HTT), is an Intel-proprietary technology used to provide process
parallelization . The technology improves processor performance under certain workloads by providing
useful work for execution units that would otherwise be idle. A processor with Hyper-Threading enabled
is treated by the operating system as two processors instead of one. Hyper-threading relies on support
in the operating system as well as the CPU.
ENWW
during start up.
to accept the change.
during start up.
to accept the change.
F10
to accept the change.
F10
to accept the change.
Workstation specifications
13

Advertisement

Table of Contents

   Related Manuals for HP Z210

Comments to this Manuals

Symbols: 0
Latest comments: