Grounding The Work Area; Recommended Esd Prevention Materials And Equipment - HP Z210 Maintenance And Service Manual

Convertible mini tower workstation
Hide thumbs Also See for Z210:
Table of Contents

Advertisement

Grounding the work area

To prevent static damage in the work area:
Cover the work surface with approved static-dissipative material. Use a wrist strap connected to
the work surface, and properly grounded tools and equipment.
Use static-dissipative mats, foot straps, or air ionizers to give added protection.
Handle electrostatic-sensitive components, parts, and assemblies by the case or PCB laminate.
Handle them only in static-free work areas.
Disconnect power and input signals before inserting and removing connectors or test equipment.
Use fixtures made of static-safe materials when fixtures must directly contact dissipative surfaces.
Keep work area free of nonconductive materials, such as plastic assembly aids and Styrofoam.
Use field service tools (such as cutters, screwdrivers, and vacuums) that are conductive.

Recommended ESD prevention materials and equipment

The recommended materials and equipment are:
Antistatic tape
Antistatic smocks, aprons, and sleeve protectors
Conductive bins and other assembly or soldering aids
Conductive foam
Conductive tabletop computers with a ground cord of one megohm ± 10% resistance
Static-dissipative table or floor mats with a hard-tie to ground
Field service kits
Static awareness labels
Wrist straps and footwear straps providing one megohm ± 10% resistance
Material-handling packages
Conductive plastic bags
Conductive plastic tubes
Conductive tote boxes
Opaque shielding bags
Transparent metallized shielding bags
Transparent shielding tubes
ENWW
Service considerations
57

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents