Download  Print this page

Solving Printer Problems; Self-troubleshooting With Hp Vision Diagnostics - HP Z210 Maintenance And Service Manual

Convertible mini tower workstation.
Hide thumbs


Table 6-5
Sound occurs intermittently.
Workstation appears to be locked
up while recording audio.

Solving printer problems

Table 6-6
Printer does not print.
Printer does not turn on.

Self-troubleshooting with HP Vision Diagnostics

HP Vision Diagnostics is a diagnostic tool that can be used by the end user or technical support
personnel to view information about the hardware configuration of the computer and perform hardware
troubleshooting on HP Workstation and Desktop systems. Booted from either DVD/CD or USB flash
key, these diagnostics run outside the operating system and make it easier to isolate potential issues
and determine hardware failures.
HP Vision Diagnostics provides:
Capture complete system configuration information that can be shared as an HTML file, including:
System serial number
System product number
System BIOS revision
Chapter 6 Diagnostics and troubleshooting
Audio problems (continued)
Processor resources are being
used by other open
The hard disk might be full.
Printer problems
Printer is not turned on and
The correct printer driver for
the application is not installed.
If you are on a network, you
might not have made a
connection to the printer.
Printer might have failed.
The cables might not be
connected properly.
Shut down all open processor-intensive applications.
Before recording, be sure there is enough free space
on the hard disk.
Try recording the audio file in a compressed format.
Turn the printer on and be sure it is online.
Install the correct printer driver for the application.
Try printing using the MS-DOS command:
DIR C:\> [printer port]
Replace printer port with the address of the printer
used. If the printer works, reload the printer driver.
Make the proper network connection to the printer.
Run printer self-test.


Table of Contents

   Related Manuals for HP Z210

Comments to this Manuals

Symbols: 0
Latest comments: