Table 4-1
Heading
Security
30
Chapter 4 System management
Computer Setup (F10) Utility menu descriptions (continued)
Option
Description
Boot Order
Lets you configure the boot order by physically reordering the menu entries. The default boot
order is:
EFI Boot Sources
●
◦
◦
◦
Legacy Boot Sources
●
◦
◦
◦
◦
You can take the following actions:
Press
●
again to drop the device in place.
Press
●
You must confirm changes by selecting
●
Enter.The computer then stores boot order changes in the physical ROM.
To temporarily override the boot order and boot from a device other than the default device
specified in Boot Order:
1.
Restart the computer.
2.
Press
3.
Wait for POST to finish and for the list of bootable devices to display.
4.
Use the arrow keys to select the preferred boot device.
5.
Press
change the default boot device.)
Setup Password
Lets you set and enable a setup password for the administrator.
If you create a setup password, you must use it to change computer setup options, to flash
the ROM, and to make changes to certain Plug and Play settings under Windows.
Power-On
Let you set and enable the power-on password.
Password
USB Floppy/CD
USB Hard Drive
ATAPI CD/DVD Drive
ATAPI CD/DVD Drive
USB Floppy/CD
Hard Drive
Network Controller
Enter
to drag a device with the arrow keys to a preferred place, then press
F5
to remove the device from consideration as a bootable device.
F9
when the F9=Boot Menu message appears on the screen.
Enter.
The computer then starts from the selected nondefault device. (This does not
File>Save Changes and Exit
and then press
Enter
ENWW