Sntp Server Configuration - NETGEAR S3300 User Manual

Table 14. Time Configuration status fields (continued)
Field
Last Attempt Status
Server IP Address
Address Type
Server Stratum
Reference Clock Id
Server Mode
Unicast Sever Max
Entries
Unicast Server
Current Entries
Broadcast Count
Click Update to update the page with the latest information on the switch.

SNTP Server Configuration

Use the SNTP Server Configuration screen to view and modify information for adding and
modifying Simple Network Time Protocol SNTP servers.

To configure a new SNTP server:
1. Select System > Management > Time > SNTP Server Configuration.
S3300 Smart Managed Pro Switch
Description
Specifies the status of the last SNTP request or unsolicited message for both
unicast and broadcast modes. If no message has been received from a server,
a status of Other is displayed. These values are appropriate for all operational
modes:
• Other. The status of the last request is unknown.
• Success. The SNTP operation was successful, and the system time was
updated.
• Request Timed Out. After an SNTP request was sent to an SNTP server,
the response timer expired before a response from the server was
received.
• Bad Date Encoded. The time provided by the SNTP server is not valid.
• Version Not Supported. The SNTP version supported by the server is not
compatible with the version supported by the client.
• Server Unsynchronized. The SNTP server is not synchronized with its
peers. This is indicated by the leap indicator field on the SNTP message.
• Server Kiss Of Death. The SNTP server indicated that no further queries
were to be sent to this server. This is indicated by a stratum field equal to
0 in a message received from a server.
Specifies the IP address of the server for the last received valid packet. If no
message has been received from any server, an empty string is shown.
Specifies the address type of the SNTP server address for the last received
valid packet.
Specifies the claimed stratum of the server for the last received valid packet.
Specifies the reference clock identifier of the server for the last received valid
packet.
Specifies the mode of the server for the last received valid packet.
Specifies the maximum number of unicast server entries that can be configured
on this client.
Specifies the number of current valid unicast server entries configured for this
client.
–
Configure System Information
57