Access The Web Management Interface When The Switch Is Already Connected To The Network - NETGEAR M4100 Series Software Setup Manual

8. Select the Configuration Method Manual radio button.
9. In the IP Address field, enter the network IP address for the switch.
For example, enter 10.100.4.100.
10. In the Subnet Mask field, enter the network subnet mask for the switch.
For example, enter 255.255.255.0.
11. Click the Apply button.
Your settings are saved.
12. Log out of the web management interface.
13. Return your computer to its original settings.
If you want to log in to the web management interface again, you now must use the newly
assigned network IP address.
Access the Web Management Interface When the Switch Is
Already Connected to the Network
This procedure describes how to access the web management interface when you already
configured the management VLAN IP address of the switch.
To access the web management interface:

1. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port
on the switch.
2. Launch a web browser such as Google Chrome, Mozilla Firefox, or Microsoft Internet
Explorer.
3. Enter the management VLAN IP address of the switch in the web browser address field.
The Login screen displays.
4. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
5. Click the Login button.
M4100 Series Switches
Get Started
15