Show System - Dell PowerConnect 5324 Command Line Interface Reference Manual

Default Configuration
There is no default configuration for this command.
Command Mode
EXEC mode
User Guidelines
1
Open telnet session from PC 5324 to other device.
2
In the other device syntax, press Cntrl-shift-t-X
3
Enter the command show session. The number of sessions opened from PC 5324 is displayed.
4
Enter the command resume [number of session] to return to the relevant telnet session.
Examples
The following table describes the significant fields shown in the display:
Console> show sessions
Connecti Host
on
-------- -------------- --------
1 Remote device
2 172.16.1.2
Field Description
Connection Connection number
Host Remote host to which the device is connected through a Telnet session.
Address IP address of the remote host.
Port Telnet TCP port number
Byte Number of unread bytes for the user to see on the connection.

show system

The show system User EXEC mode command displays system information.
Syntax
show system
Address Port
-----
172.16.1.1 23
172.16.1.2 23
Byte
----
89
8
System Management
323