Gvrp Commands - Dell PowerConnect 5324 Command Line Interface Reference Manual

set interface active
show interfaces
configuration
show interfaces status
show interfaces
description
show interfaces counters
show ports jumbo-frame
port storm-control
include-multicast
port storm-control
broadcast enable
port storm-control
broadcast rate
show ports storm-control

GVRP Commands

Command Group
gvrp enable (global)
gvrp enable (interface)
garp timer
gvrp vlan-creation-forbid
gvrp registration-forbid
clear gvrp statistics
show gvrp configuration
show gvrp statistics
show gvrp error-statistics
Reactivates an interface that was suspended by the
system.
Displays the configuration for all configured
interfaces.
Displays the status for all configured interfaces.
Displays the description for all configured interfaces.
Displays traffic seen by the physical interface.
Displays the jumbo frames configuration.
Enables the device to count multicast packets.
Enables broadcast storm control.
Configures the maximum broadcast rate.
Displays the storm control configuration.
Description
Enables GVRP globally.
Enables GVRP on an interface.
Adjusts the GARP application join, leave, and
leaveall GARP timer values.
Enables or disables dynamic VLAN creation.
De-registers all VLANs, and prevents dynamic
VLAN registration on the port.
Clears all the GVRP statistics information.
Displays GVRP configuration information.
Displays GVRP statistics.
Displays GVRP error statistics.
Privileged User
EXEC
User EXEC
User EXEC
User EXEC
User EXEC
User EXEC
Global
Configuration
Interface
Configuration
Interface
Configuration
Privileged User
EXEC
Mode
Global
Configuration
Interface
Configuration
Interface
Configuration
Interface
Configuration
Interface
Configuration
Privileged User
EXEC
User EXEC
User EXEC
User EXEC
Command Groups
27