Example
In the following example Back Pressure is enabled on g5.
Console(config)# interface ethernet g5
Console(config-if)# back-pressure
port jumbo-frame
The port jumbo-frame Global Configuration mode command enables jumbo frames for the device.
The size of the port jumbo frame is 10K. To disable jumbo frames, use the no form of this
command.
Syntax
port jumbo-frame
no port jumbo-frame
Default Configuration
Jumbo Frames are not enabled.
Command Mode
Global Configuration mode
User Guidelines
•
The command would be effective only after reset.
Example
In the following example, Jumbo Frames are enabled on the device.
Console(config)# port jumbo-frame
clear counters
The clear counters User EXEC mode command clears statistics on an interface.
Syntax
clear counters [ethernet interface | port-channel port-channel-number]
•
interface—Valid Ethernet port.
•
port-channel-number—Valid port-channel trunk index.
Default Configuration
This command has no default configuration.
126
Ethernet Configuration Commands