Dell PowerConnect 5324 Command Line Interface Reference Manual page 110

Keyword
flash
running-config
startup-config
backup-config
image
boot
tftp:
xmodem:
null:
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
• The location of a file system dictates the format of the source or destination URL.
• The entire copying process may take several minutes and differs from protocol to protocol
and from network to network.
Understanding Invalid Combinations of Source and Destination
Some invalid combinations of source and destination exist. Specifically, the following cannot
be copied:
• If the source file and destination file are the same file.
• xmodem cannot be a destination. Can only be copied to image, boot and null.
• tftp cannot be the source and destination on the same copy.
• Active Image is the image the system currently boots from (see "show bootvar"
command) or set to boot next from. Non active image is the spare image location.
110
Configuration and Image Files
Source or destination
Source or destination URL for Flash memory. It's the default in case a
URL is specified without a prefix
Represents the current running configuration file.
Represents the startup configuration file.
Represents the backup configuration file.
If source file, represent the active image file. If destination file, represent
the non-active image file.
Boot file.
Source or destination URL for a TFTP network server. The syntax for
this alias is tftp://host/[directory]/filename. The host can be either IP
address or hostname.
Source for the file from a serial connection that uses the Xmodem proto-
col.
Null destination for copies or files. A remote file can be copied to null to
determine its size.