Rmon Event - Dell PowerConnect 5324 Command Line Interface Reference Manual

Interval
Sample Type
Startup Alarm
Rising Threshold
Falling Threshold
Rising Event
Falling Event

rmon event

The rmon event Global Configuration mode command configures an event. To remove an event,
use the no form of this command.
Syntax
rmon event index type [community text] [description text] [owner name]
no rmon event index
• index—The event index. (Range: 1 - 65535)
• type—The type of notification that the device generates about this event. Can have the
following values: none, log, trap, log-trap. In the case of log, an entry is made in the log
table for each event. In the case of trap, an SNMP trap is sent to one or more
management stations.
• community text—If an SNMP trap is to be sent, it is sent to the SNMP community
specified by this octet string. (Range: 0-127 characters)
• description text—A comment describing this event. (Range: 0-127 characters)
• owner name—Enter a name that specifies who configured this event. If unspecified, the
name is an empty string. (Range: 0-127 characters)
236
RMON Commands
The interval in seconds over which the data is sampled and compared with the
rising and falling thresholds.
The method of sampling the variable and calculating the value compared
against the thresholds. If the value is absolute, the value of the variable is
compared directly with the thresholds at the end of the sampling interval. If
the value is delta, the value of the variable at the last sample is subtracted from
the current value, and the difference compared with the thresholds.
The alarm that may be sent when this entry is first set. If the first sample is
greater than or equal to the rising threshold, and startup alarm is equal to rising
or rising and falling, then a single rising alarm is generated. If the first sample is
less than or equal to the falling threshold, and startup alarm is equal falling or
rising and falling, then a single falling alarm is generated.
A sampled statistic threshold. When the current sampled value is greater than
or equal to this threshold, and the value at the last sampling interval is less
than this threshold, a single event is generated.
A sampled statistic threshold. When the current sampled value is less than or
equal to this threshold, and the value at the last sampling interval is greater
than this threshold, a single event is generated.
The event index used when a rising threshold is crossed.
The event index used when a falling threshold is crossed.