•
If no host-specific timeout, key or source values are specified, the global values apply to each
host.
Example
The following example specifies a TACACS+ host.
Console (config)# tacacs-server host 172.16.1.1
tacacs-server key
The tacacs-server key Global Configuration mode command sets the authentication encryption
key used for all TACACS+ communications between the device and the TACACS+ daemon. To
disable the key, use the no form of this command.
Syntax
tacacs-server key key-string
no tacacs-server key
•
key-string—Specifies the authentication and encryption key for all TACACS
communications between the device and the TACACS server. This key must match the
encryption used on the TACACS daemon. (Range: 0 - 128 characters)
Default Configuration
Empty string
Command Mode
Global Configuration mode
User Guidelines
•
There are no user guidelines for this command.
Examples
The following example sets the authentication encryption key.
Console (config)# tacacs-server key dell-s
tacacs-server timeout
The tacacs-server timeout Global Configuration mode command sets the timeout value. To restore
the default, use the no form of this command.
Syntax
tacacs-server timeout timeout
no tacacs-server timeout
328
TACACS Commands