Enable Password - Dell PowerConnect 5324 Command Line Interface Reference Manual

Default Configuration
No password is required.
Command Mode
Line Configuration mode
User Guidelines
• There are no user guidelines for this command.
Example
The following example specifies a password "secret" on a line.
Console (config-line)# password secret

enable password

The enable password Global Configuration mode command sets a local password to control access
to normal and privilege levels. To remove the password requirement, use the no form of this
command.
Syntax
enable password [level level] password [encrypted]
no enable password [level level]
• password—Password for this level, from 1 to 159 characters in length.
• level level—Level for which the password applies. If not specified the level is 15
(Range: 1-15).
• encrypted—Encrypted password entered, copied from another device configuration.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
• There are no user guidelines for this command.
73
AAA Commands