Show Line - Dell PowerConnect 5324 Command Line Interface Reference Manual

Syntax
exec-timeout minutes [seconds]
no exec-timeout
minutes—Integer that specifies the number of minutes. (Range: 0 - 65535)
•
• seconds—Additional time intervals in seconds. (Range: 0 - 59)
Default Configuration
The default configuration is 10 minutes.
Command Mode
Line Configuration mode
User Guidelines
• To specify no timeout, enter the exec-timeout ("0 0") command.
Examples
The following example configures the interval that the system waits until user input is detected to
20 minutes.
Console (config)# line console
Console(config-line)# exec-timeout 20

show line

The show line User EXEC mode command displays line parameters.
Syntax
show line [console | telnet | ssh]
• console—Console terminal line.
• telnet—Virtual terminal for remote console access (Telnet).
• ssh—Virtual terminal for secured remote console access (SSH).
Default Configuration
Default value is console.
Command Mode
User EXEC mode
User Guidelines
• There are no user guidelines for this command.
175
Line Commands