Login Authentication - Dell PowerConnect 5324 Command Line Interface Reference Manual

Default Configuration
If the default list is not set, only the enable password is checked. This has the same effect as
the command aaa authentication enable default enable.
On the console, the enable password is used if it exists. If no password is set, the process still
succeeds. This has the same effect as using the command aaa authentication enable default
enable none.
Command Mode
Global Configuration mode
User Guidelines
• The default and optional list names created with the aaa authentication enable command are
used with the enable authentication command.
• Create a list by entering the aaa authentication enable list-name method command where
list-name is any character string used to name this list. The method argument identifies the
list of methods that the authentication algorithm tries, in the given sequence.
• The additional methods of authentication are used only if the previous method returns an
error, not if it fails. To ensure that the authentication succeeds even if all methods return an
error, specify none as the final method in the command line.
• All aaa authentication enable default requests sent by the device to a RADIUS or TACACS
server include the username "$enab15$".
Example
The following example sets authentication when accessing higher privilege levels.
Console (config)# aaa authentication enable default enable

login authentication

The login authentication Line Configuration mode command specifies the login authentication
method list for a remote telnet, SSH or console. To return to the default specified by the
authentication login command, use the no form of this command.
Syntax
login authentication {default | list-name}
no login authentication
• default—Uses the default list created with the authentication login command.
• list-name—Uses the indicated list created with the authentication login command.
67
AAA Commands