Radius-Server Retransmit; Radius-Server Source-Ip - Dell PowerConnect 5324 Command Line Interface Reference Manual

Example
The following example sets the authentication and encryption key for all RADIUS
communications between the device and the RADIUS daemon to "dell-server".
Console (config)# radius-server key dell-server

radius-server retransmit

The radius-server retransmit Global Configuration mode command specifies the number of times
the software searches the list of RADIUS server hosts. To reset the default configuration, use the no
form of this command.
Syntax
radius-server retransmit retries
no radius-server retransmit
• retries—Specifies the retransmit value. (Range: 1 - 10)
Default Configuration
The default is 3 attempts.
Command Mode
Global Configuration mode
User Guidelines
• There are no user guidelines for this command.
Example
The following example configures the number of times the software searches the list of RADIUS
server hosts to 5 attempts.
Console (config)# radius-server retransmit 5

radius-server source-ip

The radius-server source-ip Global Configuration mode command specifies the source IP address
used for communication with RADIUS servers. To return to the default, use the no form of this
command.
Syntax
radius-server source-ip source
no radius-server-ip source
• source—Specifies the source IP address.
221
Radius Commands