Gvrp Commands; Gvrp Enable (Global); Gvrp Enable (Interface) - Dell PowerConnect 5324 Command Line Interface Reference Manual

GVRP Commands

gvrp enable (global)

GVRP, or GARP VLAN Registration Protocol, is an industry-standard protocol designed to
propagate VLAN information from device to device. With GVRP, a single switch is manually
configured with all desired VLANs for the network, and all other switches on the network learn
these VLANs dynamically.
The gvrp enable Global Configuration mode command enables GVRP globally. To disable GVRP
globally on the switch, use the no form of this command.
Syntax
gvrp enable
no gvrp enable
Default Configuration
GVRP is globally disabled.
Command Mode
Global Configuration mode
User Guidelines
• There are no user guidelines for this command.
Example
The following example globally enables GVRP on the device.
Console (config)# gvrp enable

gvrp enable (interface)

The gvrp enable Interface Configuration mode command enables GVRP on an interface. To
disable GVRP on an interface, use the no form of this command.
Syntax
gvrp enable
no gvrp enable
Default Configuration
GVRP is disabled on all interfaces by default.
141
GVRP Commands