Clock Summer-Time - Dell PowerConnect 5324 Command Line Interface Reference Manual

clock summer-time

The clock summer-time Global Configuration mode command configures the system to
automatically switch to summer time (daylight saving time). To configure the software to not
automatically switch to summer time, use the no form of this command.
Syntax
clock summer-time recurring {usa | eu | {week day month hh:mm week day month hh:mm}}
[offset offset] [zone acronym]
clock summer-time date date month year hh:mm date month year hh:mm [offset offset] [zone
acronym]
clock summer-time date month date year hh:mm month date year hh:mm [offset offset] [zone
acronym]
no clock summer-time
• recurring—Indicates that summer time should start and end on the corresponding
specified days every year.
• date—Indicates that summer time should start on the first specific date listed in the
command and end on the second specific date in the command.
• usa—The summer time rules are the United States rules.
• eu—The summer time rules are the European Union rules.
• week— Week of the month. (Range: 1 - 4, first, last)
• day—Day of the week (Range: first three letters by name, like sun)
• date—Date of the month (Range:1 - 31)
• month—Month (Range: first three letters by name)
• year— year - no abbreviation (Range: 2000 - 2097)
• hh:mm—Time in military format, in hours and minutes (Range: hh: 0 - 23, mm:0 - 59)
• offset offset—Number of minutes to add during summer time (Range: 1 - 1440).
zone acronym—The acronym of the time zone to be displayed when summer time is in
•
effect. If unspecified default to the timezone acronym. (Range: Up to 4 characters)
Default Configuration
Summer time is disabled.
offset offset—default is 60
zone acronym— If unspecified default to the timezone acronym.
If the timezone has not been defined, the default will be UTC.
95
Clock