Ic (Interface Configuration) Mode - Dell PowerConnect 5324 Command Line Interface Reference Manual

snmp-server set
snmp-server trap
authentication
sntp authenticate
sntp authentication-key
spanning-tree
spanning-tree bpdu
spanning-tree forward-time
spanning-tree hello-time
spanning-tree max-age
spanning-tree mode
spanning-tree pathcost method
spanning-tree priority
tacacs-server key
tacacs-server source-ip
tacacs-server timeout
tacacs-server host
username
vlan database
wrr-queue cos-map

IC (Interface Configuration) Mode

Command
back-pressure
channel-group
clear host dhcp
description
dot1x auth-not-req
48
Command Modes
Sets SNMP MIB value by the CLI.
Enables the switch to send Simple Network Management Protocol traps
when authentication failed.
Grants authentication for received Network Time Protocol (NTP)
traffic from servers.
Defines an authentication key for Simple Network Time Protocol
(SNTP).
Enables spanning tree functionality.
Defines BPDU handling when spanning tree is disabled on an interface
Configures the spanning tree bridge forward time.
Configures the spanning tree bridge Hello Time.
Configures the spanning tree bridge maximum age.
Configures the spanning tree protocol.
Sets the default pathcost method.
Configures the spanning tree priority.
Sets the authentication encryption key used for all TACACS+
communications between the device and the TACACS+ daemon.
Specifies the source IP address that will be used for the communication
with TACACS servers.
Sets the timeout value.
Specifies a TACACS+ host.
Establishes a username-based authentication system.
Enters the VLAN database configuration mode.
Maps assigned CoS values to select one of the egress queues.
Description
Enables Back Pressure on a given interface.
Associates a port with a Port-channel.
Sets an IP address on the device.
Adds a description to an interface.
Enables unauthorized users access to that VLAN