Tacacs-Server Source-Ip - Dell PowerConnect 5324 Command Line Interface Reference Manual

• timeout—Specifies the timeout value in seconds. (Range: 1 - 30)
Default Configuration
5 seconds
Command Mode
Global Configuration mode
User Guidelines
• There are no user guidelines for this command.
Examples
The following example sets the timeout value as 30.
Console (config)# tacacs-server timeout 30

tacacs-server source-ip

The tacacs-server source-ip Global Configuration mode command specifies the source IP address
that will be used for the communication with TACACS servers. To return to default, use the no
form of this command.
Syntax
tacacs-server source-ip source
no tacacs-server source-ip source
• source—Specifies the source IP address. (Range: Valid IP Address)
Default Configuration
The IP address would be of the outgoing IP interface.
Command Mode
Global Configuration mode
User Guidelines
• There are no user guidelines for this command.
Examples
The following example specifies the source IP address.
Console (config)# tacacs-server source-ip 172.16.8.1
TACACS Commands
329