Shutdown - Dell PowerConnect 5324 Command Line Interface Reference Manual

Command Mode
Global Configuration mode
User Guidelines
• Commands under the interface range context are executed independently on each active
interface in the range. If the command returns an error on one of the active interfaces, it does
not stop executing commands on other active interfaces.
Example
The following example shows how ports g18 to g20 and ports g22 to g24 are grouped to receive the
same command.
Console(config)# interface range ethernet g18 - g20, g22 - g24
Console(config-if)#

shutdown

The shutdown Interface Configuration mode command disables interfaces. To restart a disabled
interface, use the no form of this command.
Syntax
shutdown
no shutdown
Default Configuration
The interface is enabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
• There are no user guidelines for this command.
Examples
The following example disables port g5.
Console(config)# interface ethernet g5
Console(config-if)# shutdown
120
Ethernet Configuration Commands