Lacp Timeout - Dell PowerConnect 5324 Command Line Interface Reference Manual

Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
• There are no user guidelines for this command.
Example
The following example configures the priority value for port g8 to 247.
Console (config)# interface ethernet g8
Console (config-if)# lacp port-priority 247

lacp timeout

The lacp timeout Interface Configuration mode command assigns an administrative LACP
timeout. To reset the default administrative LACP timeout use the no form of this command.
Syntax
lacp timeout {long | short}
no lacp timeout
• long—Specifies a long timeout value.
• short—Specifies a short timeout value.
Default Configuration
The default port timeout value is long.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
• There are no user guidelines for this command.
Example
The following example assigns an administrative LACP timeout for port g8 to a long timeout value.
Console (config)# interface ethernet g8
Console (config-if)# lacp timeout long
170
LACP Commands