history size
password
autobaud
speed
MA (Management Access-level) Mode
Command
deny (management)
permit (management)
PE (Privileged User EXEC) Mode
Command
show dot1x users
boot system
clear arp-cache
clear bridge
clear gvrp statistics
clear host
clear host dhcp
clear logging
clear logging file
clear spanning-tree detected-
protocols
clock set
configure
copy
crypto certificate request
dot1x re-authenticate
login
reload
Changes the command history buffer size for a particular line.
Specifies a password on a line.
Sets the line for automatic baud rate detection
Sets the line baud rate.
Description
Defines a deny rule.
Defines a permit rule.
Description
Displays 802.1X statistics for the specified interface.
Specifies the system image that the device loads at startup.
Deletes all dynamic entries from the ARP cache.
Removes any learned entries from the forwarding database.
Clears all the GVRP statistics information.
Deletes entries from the host name-to-address cache
Deletes entries from the host name-to-address mapping received from
Dynamic Host Configuration Protocol (DHCP).
Clears messages from the internal logging buffer.
Clears messages from the logging file
Restarts the protocol migration process on all interfaces or on the
specified interface.
Manually sets the system clock.
Enters the global configuration mode.
Copies files from a source to a destination.
Generates and displays certificate requests for HTTPS.
Manually initiates a re-authentication of all 802.1X-enabled ports or the
specified 802.1X-enabled port.
Returns to User EXEC mode.
Reloads the operating system.
51
Command Modes