Rmon Commands; Snmp Commands - Dell PowerConnect 5324 Command Line Interface Reference Manual

RMON Commands

Command Group
show rmon statistics
rmon collection history
show rmon collection
history
show rmon history
rmon alarm
show rmon alarm-table
show rmon alarm
rmon event
show rmon events
show rmon log
rmon table-size

SNMP Commands

Command Group
snmp-server community
snmp-server view
snmp-server filter
snmp-server contact
snmp-server location
snmp-server enable traps
snmp-server trap
authentication
34
Command Groups
Description
Displays RMON Ethernet Statistics.
Enables a Remote Monitoring (RMON) MIB history
statistics group on an interface.
Displays the requested history group configuration.
Displays RMON Ethernet Statistics history.
Configures alarm conditions.
Displays the alarms summary table.
Displays alarm configurations.
Configures a RMON event.
Displays the RMON event table.
Displays the RMON logging table.
Configures the maximum RMON tables sizes.
Description
Sets up the community access string to permit access
to SNMP protocol.
Creates or update a view entry,
Create or update a filter entry,
Sets up a system contact.
Sets up the information on where the device is located.
Enables the switch to send SNMP traps or SNMP
notifications.
Enables the switch to send Simple Network
Management Protocol traps when authentication
failed.
Mode
User EXEC
Interface
Configuration
User EXEC
User EXEC
Global
Configuration
User EXEC
User EXEC
Global
Configuration
User EXEC
User EXEC
Global
Configuration
Access Mode
Global
Configuration
Global
Configuration
Global
Configuration
Global
Configuration
Global
Configuration
Global
Configuration
Global
Configuration