Bridge Aging-Time - Dell PowerConnect 5324 Command Line Interface Reference Manual

Syntax
bridge multicast forbidden forward-all {add | remove} {ethernet interface-list | port-channel
port-channel-number-list}
no bridge multicast forward-all
• add—Forbids forwarding all multicast packets.
• remove—Does not forbid forwarding all multicast packets.
• interface-list—Separates non consecutive valid Ethernet ports with a comma and no
spaces; a hyphen is used to designate a range of ports.
port-channel-number-list—Separates non consecutive valid port-channels with a comma
•
and no spaces; a hyphen is used to designate a range of port-channels.
Default Configuration
By default, this setting is disabled (for example, forwarding to the port is not forbidden).
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
• IGMP snooping dynamically discovers multicast router ports. When a multicast router port is
discovered, all the multicast packets are forwarded to it unconditionally.
• This command prevents a port to be a multicast router port.
Example
In this example, forwarding all multicast packets to g6 are forbidden.
Console (config)# interface vlan 2
Console (config-if)# bridge multicast forbidden forward-all add
ethernet g6

bridge aging-time

The bridge aging-time Global Configuration mode command sets the address table aging time. To
restore the default, use the no form of the bridge aging-time command.
Syntax
bridge aging-time seconds
no bridge aging-time
82
Address Table Commands