Gl2: W0502 The Parameter Is Out Of Range; Gl2: W0504 This Command Is Not Supported; Gl2: Wxxxx The Memory Is Full. (Xxxx Is 0501, 0903, Or) - Canon iPF755 User Manual

Messages regarding HP-GL/2
This type of paper is not compatible with HP-GL/2. ....................................................................................... 899
GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904) ...................................................................... 899

GL2: W0502 The parameter is out of range. ................................................................................................... 899

GL2: W0504 This command is not supported. ............................................................................................... 899

This type of paper is not compatible with HP-GL/2.
Cause
The printer has received a HP-GL/2
print job that cannot be printed on the
paper that has been advanced.
GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904)
Cause
The printer memory
is full.
GL2: W0502 The parameter is out of range.
A parameter specified in a HP-GL/2 command is out of the
supported range.
GL2: W0504 This command is not supported.
The printer has received an unsupported HP-GL/2 com-
mand.
iPF755
Follow these steps to replace the type of paper in the printer.
1. Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2. Replace the paper with a type compatible with HP-GL/2. For details on pa-
per compatible with HP-GL/2, refer to the Paper Reference Guide. (See
"Types of Paper.")
Press ▲ or ▼ to select Print, and then press the OK button to resume print-
ing. However, note that this error may cause paper jams and affect the print-
ing quality.
Because the entire print job could not be received, the printer may not be able to print the en-
tire original. Check the printing results.
In the Control Panel menu, setting On-the-Fly to On may enable printing. However, check
the printing results because the image may be incomplete in some cases.
Cause
Cause
Error Message
Corrective Action
→P.626
Corrective Action
Corrective Action
Check the print job.
If you have specified ProcessingOption > Warning
> On in the Control Panel menu, set it to Off in-
stead.
Corrective Action
Check the print job.
If you have specified ProcessingOption > Warning > On
in the Control Panel menu, set it to Off instead.
This type of paper is not compatible with HP-GL/2.
> Messages regarding HP-GL/2 >
13
899