Paper Jam; Paper Loaded Askew; Cannot Detect Papr - Canon iPF8400S User Manual

iPF8400S
Cause
A print job for printing on sheets
was sent when a roll is loaded.
You are using a roll with the Me-
dia Take-up Unit, but a print job
requiring sheets was sent.

Paper jam.

Paper jam.
Cause
A paper jam occur-
1.
Lift the Release Lever and remove the jammed paper.
red in the printer
during printing.
2.
Load the paper.
3.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK
button.
Printing will resume, starting from the page on which the error occurred.

Paper loaded askew.

Paper loaded askew.
Paper loaded crooked was detected when the paper was advanced.
• To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off or Loose in the
Skew Check Lv. setting of the printer menu. However, this may cause jams and printing problems because paper may
Important
be askew when printed. Also, the Platen may become soiled, which may soil the back of the next document when it is
printed.

Cannot detect papr

Cannot detect papr
Cause
The printer could not detect the paper.
User's Guide
2. After removing the roll, load and print on a sheet of the type and size of paper you have specified
in the printer driver.
(See "Removing the Roll from the Printer.")
(See "Loading and Printing on Sheets.")
Press ▲ or ▼ to select Stop Printing, and then press the OK button to stop printing.
1.
Press the OK button to stop printing.
2.
After removing the roll, load and print on a sheet of the type and size of paper you have specified
in the printer driver.
(See "Removing Printed Documents from the Media Take-up Unit (Optional).")
(See "Loading and Printing on Sheets.")
(See "Clearing Jammed Roll Paper.")
(See "Clearing a Jammed Sheet.")
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Printer.")
Cause
Corrective Action
Reload the paper as follows.
1. Remove the paper and press the OK button.
2.
Reload the paper.
(See "Loading Sheets in the Printer.")
(See "Loading Rolls in the Printer.")
Corrective Action
P.477
➔
P.25
➔
P.25
➔
Corrective Action
P.853
➔
P.856
➔
P.471
➔
P.492
➔
Lift up the Release Lever and reload the pa-
per.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Print-
er.")
If this error recurs after you reload the roll, re-
move the Roll Holder from the printer, push
the roll firmly in until it touches the Roll Holder
flange, and reload the Roll Holder in the print-
er.
(See "Attaching the Roll Holder to
Rolls.")
P.492
➔
P.471
➔
P.514
➔
Corrective Action
➔
P.492
➔
P.469
➔
Paper jam.
P.471
889