Manually Loading Paper To The Position For Printing - Canon 2161B002 User Manual

User manual for windows
Table of Contents

Advertisement

Printing procedure

Manually Loading Paper to the Position for Printing

After loading sheets, if you select a type of paper in the printer menu with width detection deactivated, you
will need to feed the paper a different way than usual. Specically, you must manually advance the paper to
the position of printing.
In this case, advance the paper as far into the paper feed slot as possible because it will be printed starting at
that position.
Manually advance paper as follows.
1.
When Width Detection OFF. OK to continue? is shown on the Display Screen, press ▲ or ▼
to select Leave OFF and then press the OK button.
If you select Width Detection ON, change the Media Detailed Settings information for that
paper and use the regular feeding method.
2.
Keeping the right edge of the sheet aligned with the extended line of the paper alignment line (a)
on the right side of the printer, load the sheet so that the near edge is aligned with the groove (b)
at the far end of the platen.
3.
Check the position of the loaded paper and press the OK button.
4.
After a menu for selection of the paper size is shown on the Display Screen, press ▲ or ▼ to
select the paper size, and then press the OK button.
Note
If a print job received requires paper larger than the selected paper, it may soil the Platen.
150 Basic Printing Workow

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imageprograf ipf8000s

Table of Contents