Reverting To A Default Community String; Configuring The Product Type And Access; Address Properties Dialog Box (Snmp Tab) - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

The SNMP tab is displayed
Figure 43

Address Properties dialog box (SNMP tab)

5. Select a Read option.
• Select Default 'public' to select the default string.
• Select Custom to specify a custom string.
6. Select a Write option.
• Select Default 'private' to select the default string.
• Select Custom to specify a custom string.
7. If you selected Custom in
8. Enter the custom string in the Custom field.
9. Enter the string again in the Confirm Custom field.
Click OK.
10.
1 1. Click OK to close the Discover Setup dialog box.

Reverting to a default community string

To set the community string with default values:
1. Select Discover > Setup.
The Discover Setup dialog box is displayed
2. Select an IP address from the Available Addresses list.
3. Click Add.
The Available Addresses dialog box is displayed
4. Click the SNMP tab.
The SNMP tab is displayed
5. Select Default 'public' and Default 'private'.
6. Click OK.

Configuring the product type and access

To specify the product type and set a user name and password for the address:
88 Managing the HAFM application
(Figure 43).
step 5 or step 6, continue to
(Figure 39
(Figure 43 on page 88).
step 8. Otherwise, proceed to
on page 82).
(Figure 42 on page 86).
step 10.