Deleting a security set
To delete a security set, enter the securityset delete command, as shown in the following example:
8/20q FC Switch (admin-security) #> securityset delete securityset_1
Renaming a security set
To rename a security set. enter the securityset rename command, as shown in the following
example:
8/20q FC Switch (admin-security) #> securityset rename securityset_old
securityset_new
Copying a security set
To copy a security set and its contents to a new security set, enter the securityset copy command, as
shown in the following example:
8/20q FC Switch (admin-security) #> securityset copy securityset_1 securityset_2
Adding groups to a security set
To add a group to a security set, enter the securityset add command, as shown in the following
example:
8/20q FC Switch (admin-security) #> securityset add securityset_1 group_isl
group_port
Removing groups from a security set
To remove groups from a security set, enter the securityset remove command, as shown in the
following example:
8/20q FC Switch (admin-security) #> sescurityset remove securityset_1 group_isl
group_port
Activating a security set
To apply security to the fabric, enter the securityset activate command, as shown in the following
example:
8/20q FC Switch (admin) #> securityset activate securityset_1
Deactivating a security set
To deactivate the active security set and disable security in the fabric, enter the
securityset deactivate command, as shown in the following example:
8/20q FC Switch (admin) #> securityset deactivate
Managing groups
Managing groups consists of the following tasks:
• Creating a
• Deleting a
• Renaming a
• Copying a
• Adding members to a
• Modifying a group
• Removing members from a
All of these tasks require an Admin session and a Security Edit session.
group, page 98
group, page 98
group, page 98
group, page 98
group, page 98
member, page 99
group, page 99
8/20q Fibre Channel Switch command line interface guide
97