Table 19
Planning rule parameters
Parameter
set rule_id
where rule
description
headline
errormsg
remedy
Rule types
There are three types of rules that define the where rule parameter:
•
Connection rules—Specify which devices can be connected in a plan
•
Property validation rules—Verify the validity or uniqueness of device names in a plan
(Table
21).
•
Capacity control rules—Verify the connections in a plan
152
Optional HAFM features
Required
Description
to load
rule?
Yes
Sets the rule ID.
Yes
Sets the actual rule.
A list of rule types
follows this table.
No
Provides a more
detailed description of
the rule.
No
Provides a short
overview of the rule.
No
Specifies the error
message to display if
the rule is violated. If
this statement is not
specified, or if it is null,
a generic error
message is displayed.
No
Specifies a remedy for
the rule violation. This
text is displayed on the
evaluation window.
Format
Must be a unique value,
but can be any length and
format.
Use only the keywords
provided; otherwise the
rule fails.
Must be prepended with
an "and."
Must be enclosed within
quotation marks.
Must be prepended with
an "and."
Must be enclosed within
quotation marks.
Must be prepended with
an "and."
Must be enclosed within
quotation marks.
Must be prepended with
an "and."
Must be enclosed within
quotation marks.
(Table
20).
Table
22).