Email Event Notification Dialog Box - HP 316095-B21 Installation Manual

1. Minimize the Hardware view and return to the HAFM application.
2. At the HAFM application main window, select Monitor > Event Notification > Email.
The Email Event Notification dialog box is displayed
Figure 27

Email Event Notification dialog box

3. To enable or disable e-mail notification, select or clear the Enable Email Event Notification check
box.
4. Enter the IP address or DNS host name of the SMTP server in the E-mail Server box. Use 64 or
fewer alphanumeric characters. HP recommends using the IP address.
5. Enter the e-mail address to which e-mail replies should be sent in the Reply Address box.
6. At the Summary Interval box, enter the length of time the application should wait between
notifications. Select seconds, minutes, or hours from the associated drop-down list.
Notifications are combined into a single e-mail and sent at each interval setting. An interval
setting of zero causes notifications to be sent immediately.
IMPORTANT:
very quickly.
7. To specify users that are to receive e-mail notification, click User List.
60 Using HAFM to configure the Edge Switch
Setting too short of an interval can cause the recipient's e-mail inbox to fill
(Figure 27).