Network Settings; Chapter 3 Network Settings - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SCREENOS DEVICES GUIDE REV 01 Manual
Configuring screenos devices guide
Hide thumbs
Also See for NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SCREENOS DEVICES GUIDE REV 01:
- Manual (340 pages) ,
- Administration manual (1026 pages) ,
- Installation manual (244 pages)
Table of Contents
Advertisement
CHAPTER 3
Network Settings
Copyright © 2010, Juniper Networks, Inc.
The Device Manager module in Network and Security Manager (NSM) enables you to
configure the managed Juniper Networks security devices in your network. You can edit
configurations after you add or import a managed device, or create configurations when
you model a device. For details about adding, importing, or modeling a device, see the
Network and Security Manager Administration Guide.
This chapter details the device configuration parameters, and provides configuration
examples when possible. For instructions on configuring specific device settings, see the
Network and Security Manager Online Help.
After you edit or create a configuration for a device, you must update the configuration
on the managed device for your changes to take effect. For details on updating devices,
see the Network and Security Manager Administration Guide.
Use security policies to configure firewall and VPN rules that control traffic on your
network. Use the VPN Manager to configure VPNs.
Configuring Zones and Zone Properties in ScreenOS Devices Overview on page 39
Predefined Screen Options Overview on page 40
Configuring Flood Defense Settings for Preventing Attacks on page 41
Example: Configuring UDP Flooding Protection (NSM Procedure) on page 43
HTTP Components and MS-Windows Defense Method on page 43
Protection Against Scans, Spoofs, and Sweeps on page 44
IP and TCP/IP Anomaly Detection on page 45
Prevention of Security Zones Using Denial of Service Attacks on page 47
Malicious URL Protection on page 49
Example: Enabling the Malicious URL Blocking Option (NSM Procedure) on page 50
Interface Types in ScreenOS Devices Overview on page 50
Configuring Physical and Function Zone Interfaces in ScreenOS Devices
Overview on page 52
Setting Interface Properties Using the General Properties Screen on page 53
Setting WAN Properties Using the WAN Properties Screen on page 54
Setting Port Properties Using the Port Properties Screen on page 54
37
Advertisement
Table of Contents
Need help?
Do you have a question about the NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SCREENOS DEVICES GUIDE REV 01 and is the answer not in the manual?