Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SCREENOS DEVICES GUIDE REV 01 Manual page 270

Configuring ScreenOS Devices Guide
246
Select Password, and then enter and confirm the password: Cs10kdD3.
Create a local user group called Field Sales that includes the Adam, Betty, and Carol
4.
local user objects.
Configure the remote settings object. Configure the following settings, and then click
5.
OK:
For Name, enter RM_L2TP.
For Color, select green.
For Dns1, enter 1.1.1.2.
For Dns2, enter 1.1.1.3.
For Wins1, enter 0.0.0.0.
For Wins2, enter 0.0.0.0.
For details on creating remote settings objects, see the Network and Security Manager
Administration Guide.
Configure the IP pool object. Configure the following settings, and then click OK:
6.
For IP Pool Name, enter Global.
For Color, select magenta.
For Start IP, enter 10.10.2.100.
For End IP, enter 10.10.2.180.
For details on creating IP pool objects, see "Configuring IP Pools" in the Network
and Security Manager Administration Guide.
Configure the L2TP tunnel:
7.
In Device Manager, double-click the device icon for the device on which you want
to configure the L2TP tunnel.
In the device navigation tree, select VPN Settings > L2TP. In the display area, click
the Add icon. The null-L2TP tunnel dialog box appears.
Configure the following settings, and then click OK:
8.
For Name, enter Sales_Corp.
For Outgoing Interface, select ethernet3.
For Keep Alive, enter 60.
For Peer IP, enter 0.0.0.0 (because the peer's ISP dynamically assigns it an IP
address, enter 0.0.0.0 here).
Select Use Custom Settings, and leave the default authentication server as Local.
For User/Group, select Dialup Group, and then select Field Sales.
Copyright © 2010, Juniper Networks, Inc.