Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SCREENOS DEVICES GUIDE REV 01 Manual page 164

Configuring screenos devices guide
Hide thumbs Also See for NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SCREENOS DEVICES GUIDE REV 01:
Table of Contents

Advertisement

Configuring ScreenOS Devices Guide
140
For Username, enter user1@domain1.
For Password, enter swordfish.
For Access Concentrator, enter isp_ny_ac.
For Service, enter Big_Apple_Service.
Select Clear On Disconnect.
Leave all other defaults.
Configure the PPPoE Instance for the Los Angeles ISP:
8.
In the device navigation tree, select Network > PPPoE.
Click the Add icon. The New PPPoE Instance dialog box appears.
Configure the following options, and then click OK:
9.
For Name, enter isp_los_angeles.
For Interface, select the subinterface ethernet3.1.
For Username, enter user2@domain2.
For Password, enter marlin.
For Access Concentrator, enter isp_la_ac.
For Service, enter Angels_Service.
Select Clear On Disconnect.
Leave all other defaults.
Configure the PPPoE Instance for the Chicago ISP:
10.
In the device navigation tree, select Network > PPPoE.
Click the Add icon. The New PPPoE Instance dialog box appears.
Configure the following options, and then click OK:
11.
For Name, enter isp_chicago.
For Interface, select the subinterface ethernet3.2.
For Username, enter user3@domain3.
For Password, enter trout.
For Access Concentrator, enter isp_c_ac.
For Service, enter Windy_City_Service.
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

Table of Contents