Adding Proxy Addresses Overview - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SCREENOS DEVICES GUIDE REV 01 Manual
Configuring screenos devices guide
Hide thumbs
Also See for NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SCREENOS DEVICES GUIDE REV 01:
- Manual (340 pages) ,
- Administration manual (1026 pages) ,
- Installation manual (244 pages)
Table of Contents
Advertisement
Configuring ScreenOS Devices Guide
Related
Documentation
Adding Proxy Addresses Overview
Related
Documentation
194
For Source Interface, select untrust.
For Server Name, enter 10.1.2.5.
For Server Port, enter 15868.
For Server Timeout (in seconds), enter 10.
For Fail Mode, select Permit.
For Message Type, select NetScreen.
For Message Sent to Blocked Client, enter We're sorry, but the requested URL is
prohibited. Contact ntwksec@mycompany.com.
Click OK to save your settings and close the device configuration.
Adding Proxy Addresses Overview on page 194
Redirect Web Filtering in ScreenOS Using NSM Overview on page 192
For ScreenOS 6.1 or later, you can add the proxy address value for http and ssl as pattern
updates. You can create the proxy value under Device Manager > Devices > Security >
Proxy.
Example: Configuring Redirect Web Filtering in ScreenOS (NSM Procedure) on page 193
Redirect Web Filtering in ScreenOS Using NSM Overview on page 192
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
