Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SCREENOS DEVICES GUIDE REV 01 Manual page 272

Configuring ScreenOS Devices Guide
248
aspect of L2TP. For example, you might use a SecurID server to authenticate an L2TP
user but make the address assignments from the local database.
Figure 3: Configure L2TP Local User
In the NSM navigation tree, select Object Manager >User Objects > Local Users. In
1.
the display area, click the Add icon. Configure the following settings, and then click
OK:
For Name, enter Adam.
For Color, select orange.
Select Enable, and then select L2TP.
Select Password, and then enter and confirm the password: AJbioJ15.
For information about how to create user objects, see the Network and Security
Manager Administration Guide.
In the NSM navigation tree, select Object Manager >Remote Settings. In the display
2.
area, click the Add icon. Configure the following settings, and then click OK:
For Name, enter RM_L2TP.
For Color, select green.
Enter comments, if desired.
For Dns1, enter 1.1.1.2.
For Dns2, enter 1.1.1.3.
For Wins1, enter 0.0.0.0.
For Wins2, enter 0.0.0.0.
For information about how to create remote settings objects, see the Network and
Security Manager Administration Guide.
In the NSM navigation tree, select Object Manager > IP Pools. Configure the new
IP pool:
In the display area, click the Add icon. The New IP Pool dialog box appears. Configure
3.
the following settings:
Copyright © 2010, Juniper Networks, Inc.