Understanding The Search Function In The Nsm User Interface - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SCREENOS DEVICES GUIDE REV 01 Manual

Configuring ScreenOS Devices Guide
Related
Documentation

Understanding the Search Function in the NSM User Interface

Table 10: Search Functions in the NSM UI
Search Mode Function
Contains String [C] Use to locate a pattern
Search Mode anywhere in a string.
Starts with [S] Use to locate a pattern at the
Search Mode beginning of a string.
22
Understanding NSM User Interface Menus and Toolbars on page 12
Understanding the Search Function in the NSM User Interface on page 22
NSM Modules Overview on page 13
You can use the integrated search feature in NSM to quickly locate a specific setting
within a UI screen or dialog box.
To locate a word, begin entering the word and the search window automatically appears
in the top left of the selected screen or dialog box. The UI attempts to match your entry
to an existing value; as you enter more characters, the UI continues to search for a match.
Use the arrow keys to move between each matching value. If your entry appears in red,
no matching value was found within the selected screen or dialog box.
To locate a different data type, such as an IP address, change the search mode. To display
all available search modes, press the backslash key (\). The search mode window appears.
Press the key that represents the search mode you want to use, and then begin entering
the search criteria. Switching to another view or pressing the ESC key ends the search
operation and closes the tool window. Table 10 on page 22 describes the detail sections
in each search mode.
Your Action
For example, to locate the pattern "RPC" in service objects:
1.
2. Enter C, and then enter RPC. The UI automatically highlights the first
For example, to locate the pattern "OR" in security devices:
1.
2. Enter S, then enter OR. The UI automatically highlights the first
In the NSM navigation tree, select Object Manager > Service Objects
> Predefined Service Objects, and then select the Service Object
icon at the top of the Service Tree tab.
match, MS-RPC-ANY.
In the NSM navigation tree, select Device Manager > Devices >
Predefined Service Objects, then select the Service Object icon at
the top of the Device Tree tab.
match, OR_EU_208.
Copyright © 2010, Juniper Networks, Inc.