Example: Configuring Redirect Web Filtering In Screenos (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SCREENOS DEVICES GUIDE REV 01 Manual
Configuring screenos devices guide
Hide thumbs
Also See for NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SCREENOS DEVICES GUIDE REV 01:
- Manual (340 pages) ,
- Administration manual (1026 pages) ,
- Installation manual (244 pages)
Table of Contents
Advertisement
Table 45: Web Filtering Options (continued)
Web Filtering Options
Message Type
Message Sent to Blocked Client
Related
Documentation
Example: Configuring Redirect Web Filtering in ScreenOS (NSM Procedure)
Copyright © 2010, Juniper Networks, Inc.
Description
The source of the message the user receives when Websense or SurfControl blocks
a site.
If you select NetPartners Websense/SurfControl, the security device forwards
the message it receives from the Websense or SurfControl server.
If you select NetScreen, the security device sends the message that you entered
in the Message Sent to Blocked Client box.
The message the security device returns to the user after blocking a website. You
can use the message sent from the Websense or SurfControl server, or create a
message (up to 500 characters).
If you change the default port on the server you must also change the port on the security
device.
All vsys devices assigned to the same WebSense Web-Filtering server use the same
Server Timeout, Fail Mode, and Message Type. Although you can configure different
values for these fields for different vsys devices in the NSM UI, the WebSense server uses
only the values defined for the vsys device that most recently contacted the Web-Filtering
server.
If you select NSM, some of the functionality that Websense provides, such as redirection,
is suppressed.
Example: Configuring Redirect Web Filtering in ScreenOS (NSM Procedure) on page 193
Example: Configuring Integrated Web Filtering (NSM Procedure) on page 190
Configuring Integrated Web Filtering in ScreenOS (NSM Procedure) on page 190
Select Websense (Redirect) as your Web filtering policy. The following example explains
how to configure redirect Web filtering in ScreenOS devices.
To configure redirect Web filtering in ScreenOS devices:
In the NSM navigation tree, select Device Manager > Devices, and then double-click
1.
the device for which you want to configure Web filtering. The device configuration
appears.
In the device navigation tree, select Security > Web Filtering, and then click the
2.
Websense (Redirect) tab.
Select Enable Web Filtering, and then configure the following WebSense settings:
3.
Chapter 6: Security
193
Advertisement
Table of Contents
