Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SCREENOS DEVICES GUIDE REV 01 Manual page 47

Table 10: Search Functions in the NSM UI (continued)
Search Mode Function
Regular Expression Use to locate a value using a
[R] Search Mode regular expression.
IP [I] Search Mode Use to locate an IP address.
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Your Action
For example, to locate all attack objects that detect denial-of-service
attacks:
1.
2. Select the first entry in the Name column, and then press the
3. Enter R, and then enter the following characters: DoS|.enial.
The UI automatically highlights the first match; click the Down Arrow
key to highlight the next match.
NOTE: The regular expression search mode supports all common regular
expressions. For more information about regular expressions, refer to a
dedicated resource, such as Mastering Regular Expressions, 2nd Edition,
by Jeffrey E. F. Friedl.
For example, to locate the IP address 5.5.5.50 and 5.5.5.51 in Address
Objects:
1.
2. Select the first entry in the Name column IP/Domain, and then press
3. Enter I, and then enter 5.5.5.*. The UI automatically highlights the
When searching in a table, your search criteria is applied only to the selected column. If
you select a different column, such as Name, and perform the same search, your results
differ.
Understanding Validation Icons and Validation Data in the NSM User Interface on
page 21
NSM Modules Overview on page 13
NSM User Interface Overview on page 12
Chapter 1: NSM User Interface and NSM Key Management Features
In the NSM navigation tree, select Object Manager > Attack Objects,
and then select the Predefined Attacks tab.
backslash key (\) to display the search mode window.
In the NSM navigation tree, select Object Manager > Address
Objects, and then select the Address Table tab.
the backslash key (\) to display the search mode window.
first match, 5.5.5.50. Click the Down Arrow key to highlight the next
match, 5.5.5.51.
23