Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SCREENOS DEVICES GUIDE REV 01 Manual page 325

Copyright © 2010, Juniper Networks, Inc.
Table 74: Route MAP Match Conditions (continued)
Property
Route Type (OSPF)
Tag
Permitted Route Attributes
The attributes that be configured for matching permitted routes are displayed in Table
75 on page 301.
Table 75: Permitted Route Attributes
Property Description
AS Path (BGP) Prepends a specified AS path access list to the path list attribute of the
matching route.
Community (BGP) Sets the community attribute of the matching route to the specified
community list.
Next-Hop Sets the next-hop of the matching route to the specified IP address.
Tag Sets the tag of the matching route to the specified tag value or IP address.
Weight Sets the weight of the matching route.
Metric Type (OSPF) Sets the OSPF metric type of the matching route to either external type
1 or external type 2.
Local Preference Sets the local-pref attribute of the matching route to the specified value.
(BGP)
Preserve preference Preserves the preference value of the matching route that is exported
(ScreenOS 5.1 and into another virtual router.
later only)
Description
Select the route types (OSPF internal, external type 1, or external
type 2) that a route must match.
Select the route tag value a route must match.
Chapter 10: Routing
301