Exporting And Importing Device Configurations (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SCREENOS DEVICES GUIDE REV 01 Manual

Related
Documentation

Exporting and Importing Device Configurations (NSM Procedure)

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
In ScreenOS 6.1 high-end platforms, NSM allows the user to assign or unassign a VLAN
group to a VSD. The user can create VLAN groups only after importing the VVLANlan in
the members. The user needs to set the VSD group in cluster mode and the VSD group
ID list is available from the cluster member. All VLANs belonging to the group will be
assigned to the VSD group. The user can assign multiple VLAN groups to a VSD group
as well.
NSRP Clusters Overview on page 363
Creating an NSRP Cluster on page 365
Active/Active Configurations Overview on page 370
Changing VSD Group Member States (NSM Procedure) on page 373
Use the Export Device Config To File directive to export an existing configuration on a
security device(s) to a file.
To export a device configuration to a file:
In the NSM navigation tree, select Device Manager > Devices, and select a security
1.
device.
From the Devices menu, select Configuration > Export Device Config To File.
2.
Select a security device(s). Click OK. A Job Information window appears displaying
3.
the status of the export process.
Click the device(s) whose configuration(s) you want to save, and then click Save
4.
Selected.
After the export has completed, you can then use the Import Device Config From File
function to import that configuration to a security device.
To import a device config from a file:
In the NSM navigation tree, select Device Manager > Devices, and select a security
1.
device.
From the Devices menu, select Configuration > Import Device Config From File. A
2.
Select Target Directory window appears.
Select the configuration file. Pay careful attention to select a configuration file that
3.
was exported from the same type of security device running the same version of
ScreenOS.
Click Import. A Job Information window appears displaying the status of the import
4.
process.
NSRP Clusters Overview on page 363
Creating an NSRP Cluster on page 365
Chapter 13: High Availability
379