Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SCREENOS DEVICES GUIDE REV 01 Manual page 215
Configuring screenos devices guide
Hide thumbs
Also See for NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SCREENOS DEVICES GUIDE REV 01:
- Manual (340 pages) ,
- Administration manual (1026 pages) ,
- Installation manual (244 pages)
Table of Contents
Advertisement
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
A Web category is a list of URLs organized by content. SurfControl Content Portal Authority
(CPA) servers maintain a large database of all types of Web content classified into 40
categories. For a list of SurfControl Web Categories, see "Appendix C, SurfControl Web
categories," in the Network and Security Manager Administration Guide.
SurfControl has three server locations that each serve a specific geographic area: the
Americas, Asia Pacific, and Europe/Middle East/Africa. The default primary server is the
Americas; the default backup server is Asia Pacific.
URLs and categories created and maintained by SurfControl appear in the NSM UI as
predefined, and cannot be edited. You can also create custom URLs, and then use those
URLs within a custom Web Filtering Profile.
In this example, you select SurfControl CPA (Integrated) as your Web Filtering profile.
To configure integrated Web filtering:
In the NSM navigation tree, select Device Manager > Devices, and then double-click
1.
the device for which you want to configure Web Filtering. The device configuration
appears.
In the device navigation tree, select Security > Web Filtering, and then click the
2.
SurfControl CPA (Integrated) tab.
Select CPA Server Enable, and then configure the following SurfControl Settings:
3.
For Server, select America.
For Primary Host, enter usi.SurfCA.com.
For Primary Port, enter 9020.
For Fail Mode select block.
Select Enable Cache, and then configure the following cache settings:
For Cache Timeout (hours), enter 24.
For Cache Size (K bytes), enter 500.
For Query Interval (weeks), enter 2.
Select Enable Group-based URL Filtering, and then configure the following
group-based URL filtering options:
For User Group select juniper.
For Priority select 1.
For Bound Profile select ns-profile (predefined).
Click OK to save your settings and close the device configuration.
Redirect Web Filtering in ScreenOS Using NSM Overview on page 192
Configuring Integrated Web Filtering in ScreenOS (NSM Procedure) on page 190
Chapter 6: Security
191
Advertisement
Table of Contents
Related Manuals for Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SCREENOS DEVICES GUIDE REV 01
Related Products for Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SCREENOS DEVICES GUIDE REV 01
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - CONFIGURING INTRUSION DETECTION AND PREVENTION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - NSMXPRESS SERIES II REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3
- Juniper NETWORK AND SECURITY MANAGER 2010.2
- Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - CATEGORY OFFENSE INVESTIGATION GUIDE REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1
- Juniper MEDIA FLOW CONTROLLER 2.0.5