Enabling Ospf (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SCREENOS DEVICES GUIDE REV 01 Manual

Configuring ScreenOS Devices Guide
Related
Documentation

Enabling OSPF (NSM Procedure)

Related
Documentation
314
Route Types Overview on page 295
Route Maps Overview on page 300
Routing Table Entries Overview on page 305
Configuring Route Preferences on page 312
Dynamic Routing Configuration Overview on page 313
Global OSPF Settings Overview on page 315
Configuring OSPF Interface Parameters Overview on page 317
To enable OSPF on a security device, you must first create an OSPF instance on a virtual
router, and then enable OSPF on individual interfaces.
To create and OSPF instance in a virtual router:
In the NSM navigation tree, select Device Manager > Devices. Double-click the device
1.
object to open the device configuration.
In the device navigation tree, select Network > Virtual Router and double-click the
2.
virtual router for which you want to configure OSPF.
In the virtual router navigation tree, select Dynamic Routing Protocol, and then select
3.
Configured OSPF Instance. The OSPF settings appear in the router navigation tree.
Select OSPF > Parameters, and then select Enable OSPF. If desired, configure
4.
additional global and security settings, as detailed in "Global OSPF Settings Overview"
on page 315.
Click OK to save your changes to the virtual router.
5.
To enable OSPF on an interface:
In the NSM navigation tree, select Device Manager > Devices. Double-click the device
1.
object to open the device configuration.
In the device navigation tree, select Network > Interface and double-click the interface
2.
for which you want to configure OSPF.
In the interface navigation tree, select Protocol and select the OSPF tab.
3.
Select Enable OSPF. If desired, configure additional interface and security settings,
4.
as detailed in "Configuring OSPF Interface Parameters Overview" on page 317.
Click OK to save your changes to the interface.
5.
Configuring Route Preferences on page 312
Dynamic Routing Configuration Overview on page 313
OSPF Protocol Configuration Overview on page 313
Copyright © 2010, Juniper Networks, Inc.