Table of Contents
Advertisement
3.5.7 Selecting the Time Zone
To set the time zone:
Home window>>System configuration>>Management server
1 Select the following:
1a Select a region from the Region drop-down list in the Date and time area.
1b Select a time zone from the Time zone drop-down list.
2 Click ok.
3.5.8 Enabling SNMP
To select SNMP settings:
Home window>>System configuration>>Management server>>SNMP settings
1 Select the Enable SNMP check box to select the SNMP settings.
1a Enter the SNMP read community string.
1b Enter the SNMP allowed source network. The value must be either "default" or a network
specified in CIDR notation.
2 Select the Outgoing SNMP notifications check box.
3 Enter a comma-separated list of IP address or hostnames that can receive the SNMP
notifications.
4 Enter the community string used to authorize SNMP notifications from Novell ZENworks
Network Access Control.
5 Select one or both of the following:
5a Select the Resend notifications check box and enter the resend interval, for
example 60.
NOTE: NAC policy tests can be configured such that if an endpoint fails the test, it will
be granted network access temporarily. In these cases, it might be desirable not to send an
SNMP notification.
5b Select the Do not send notifications when an endpoint has been
granted temporary network access check box to disable these
notifications.
3.5.9 Modifying the MS root Account Password
To change the MS root account password:
Home window>>System configuration>>Management server
1 Enter the new password in the Root password text box in the Other settings area.
2 Re-enter the password in the Re-enter root password text box.
3 Click ok.
System Configuration
55
Advertisement
Table of Contents
