Table of Contents
Advertisement
Setting Up a Domain and a Post
1 4
Office in a Linux Cluster
You should have already reviewed
page 133
and filled out the
Section 13.7.2, "Agent Clustering Worksheet," on page
following tasks to set up GroupWise
Section 14.1, "Setting Up a New GroupWise System in a Linux Cluster," on page 143
Section 14.2, "Creating a New Secondary Domain in a Linux Cluster," on page 144
Section 14.3, "Creating a New Post Office in a Linux Cluster," on page 145
Section 14.4, "Installing and Configuring the MTA and the POA in a Cluster," on page 146
Section 14.5, "Testing Your Clustered GroupWise System," on page 160
Section 14.6, "Managing Your Clustered GroupWise System," on page 161
Section 14.7, "What's Next," on page 163
Section 14.8, "Clustering Quick Checklists," on page 164
14.1 Setting Up a New GroupWise System in a
Linux Cluster
The GroupWise Installation program walks you through setting up the primary domain and an initial
post office in the primary domain. You might be creating your primary domain and initial post office
on the same
GroupWise partition
domain and initial post office and then installed the GroupWise agents on multiple nodes in the
cluster, you can create additional secondary domains and post offices as needed.
To set up the primary domain and initial post office for a new GroupWise system in a clustering
environment:
1 Start with the first node on the domain failover list
2 Make sure that ConsoleOne
If necessary, you can download ConsoleOne for Linux from the
(http://download.novell.com). ConsoleOne is always installed in /usr/Consoleone.
3 If necessary, mount the
distribution directory
4 Mount the
GroupWise partition
needed, the GroupWise partition for the post office
where the primary domain and the initial post office for your new GroupWise system will be
created.
5 From the GroupWise 7 Administrator for Linux CD, run the GroupWise Installation program,
as described in
"Starting the GroupWise Installation Program on
GroupWise
System" in the
Chapter 13, "Planning GroupWise in a Linux Cluster," on
Section 13.7.1, "System Clustering Worksheet," on page 140
®
in a clustering environment on Linux:
or on two different partitions. After you have created the primary
®
is installed on the node.
GroupWise partition
where you want to create the GroupWise software
(System Clustering Worksheet item
for the domain
GroupWise 7 Installation
Setting Up a Domain and a Post Office in a Linux Cluster
141. You are now ready to complete the
(Agent Clustering Worksheet item
Novell Product Downloads site
6).
(System Clustering Worksheet item
(System Clustering Worksheet item
Linux" in
Guide.
14
and the
2).
7) and, if
8),
"Installing a Basic
143
Advertisement
Table of Contents
