Configuring Custom Tools - McAfee MANAGEMENT EDITION 2.5 Administrator's Manual

10. Enter the number of seconds to elapse before the message dialog box
11. Click OK.

Configuring custom tools

The Management Console automatically adds the NetShield Console tool to
the Management Console's Tools menu if it detects that the NetShield NT
Console component of the NetShield NetWare program is installed on the
same Windows NT workstation as the Management Console. The NetShield
Console is required to configure NetShield NetWare servers, which cannot be
fully configured from the Management Console.
You can also add your own custom tools to the Management Console's Tools
menu (e.g., to launch specific applications or utilities from the console). The
following steps show how to add a NetWare Server Remote Console, a tool
that you can set up to start a remote session for a selected NetWare server.
Follow these steps to add custom tools to the Tools menu:
1. On the Management Console's Tools menu, click Customize Tools.
2. In the Menu Text box, enter a descriptive name for the tool (e.g.,
3. In the Target text box, enter the full directory path for the application or
time will timeout and the Update Agent can continue. You can also use
the arrows to select your preferred value. The default is 30 seconds.
The Configure Custom Tools dialog box appears
Figure 5-20. Configure Custom Tools dialog box
NetWare Server Remote Console), which will appear in the Customize
Tools section of the Management Console's Tools menu. You can also
select a tool name from the list, which contains the most recently
removed custom tools.
tool that you want to launch (e.g., \\%AVMACHINE%\SYS\PUBLIC\
RCONSOLE.EXE), or click the Browse (...) button to locate the tool.
Updating Your Anti-virus Software
(Figure 5-20).
Administrator's Guide 157